User manual

- Tail type
Use the Tail type functions to program the tail mix to match your airplane. 4 tail types (normal, V
tail, delt/w, 2elev sv appear) are available. The correct value should be matched each other since
the some value is not match to the others, refer to the below table.
Press the direction button to select the tail type line then press the ENT button to highlight the
value. Press the direction button to choose desired value then press the ESC button to remove the
highlight. Press the ESC button again to return to the previous screen.
- Aile/ap
Use the Aile/ap functions to program aile/ap mix to match your airplane. 5 aile/aps (1aile, 1aile
1ap, 2aile, 2aile 1ap, 2aile 2ap) are available. The correct value should be matched each other
since the some value is not match to the others, refer to the below table. Press the direction button
to select the aile/ap line then press the ENT button to highlight the value. Press the direction
button to choose desired value then press the ESC button to remove the highlight. Press the ESC
button again to return to the previous screen.
NOTE : The correct value should be matched each other since the some value is not match to
the others, refer to the table.
ENT
14
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
Motor at C1
Tail type
Aile/ap
no, no/inv
1 aile 1 ap
normal,V-tail,delt/FlW
2 aile
1 aile
2 aile 1 ap
2 aile 2 ap
1 aile 1 ap
2 elev sv
2 aile
1 aile
2 aile 1 ap
1 aile 1 ap
normal,V-tail
Idle re, idel fr
2 aile
1 aile
2 aile 1 ap
2 aile 1 ap
2 aile 2 ap
Delt/FlW
2 aile
1 aile 1 ap
2 elev sv
2 aile
1aile
press
press
press
press