User manual

- Motor at C1 idel fr
The idle position of the throttle stick (C1) is forward, away from the user, if the throttle stick is not
there, the throttle warning message “Throttle too high” appears and the cut off option is activated.
Press the direction button to select the value,+150%,. Place the throttle stick at the desired position
and press the ENT button then the adjusted value is applied (The adjusted value is activated when
the throttle stick is in that position).
NOTE : the value,+150%, is the throttle stick position where the cut off function is activated.
Press the direction button to select the hyphen then press the ENT button. The popup message
“push desired switch into position on” appears then move the switch to the desired position (The cut
off function is activated when the switch is moved to that position)
- Cut off
When the option of “idle re” or “idle fr” is selected, the cut off option is activated. It turns off the
internal combustion engine or the electric motor.
Press the ENT button to remove the highlight of the motor at C1 value then press the direction but-
ton to select the cut off line. Press the ENT button to highlight -100% of the cut off value then press
the direction button to adjust the value. Press the ENT button to remove the highlight
NOTE : The value of -100% is the cut off position the user can program, if the cut off value is pro-
grammed less than -100%, the breathing hole of Engine carburetor is block or the speed controller make
the motor off so the power is not delivered to the airplane.
13
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
WARNING : Ensure that any internal-combustion engine or electric motor shouldn’t be running
accidentally during the programming process.
press
press
press
press
press