Operation Manual

English

INNOVATION & TECHNOLOGIE

46 47

After the last time tapping the cross, calibration is complete and it appears this

window.

So tap on the screen to complete the process.

Display “3. Resource Update“

After recalling up this display, you can transfer, if required, the image and

sound les from the PC to the memory of the charger. The necessary les and

update instructions can be found on the website www.graupner.de on the prod-

uct page under Download.

NOTE

At the same place you will also nd the necessary les and informa-

tion for a rmware update.

Display “4. BLC Port Test“

After calling up this display, the adjacent window appears. Further features are

only accessible by authorized service.

Firmware update

Firmware updates for your Graupner polaron EX-1400 charger can be made through the built mi-

ni-USB port at the top of the charger from a PC or laptop with Windows XP, Vista, 7 or 8 OS.

For the necessary programs and les to update the charger see in the product Download page on

the web site www.graupner.de.

Download the required software from the Internet and extract it on your PC or laptop. For details,

refer to the instructions provided with the software package documentation.

Connect the switched charger through the supplied USB cable (USB A to mini-B USB 5-pin) to

your PC or laptop by plugging one end of the USB cable directly into the 5-pin mini-USB to the

charger upper port and the other end into an available USB port on your computer.

Start the previously unzipped program “Firmware_Upgrade_grStudio” in version 3.9 or higher.

Click afterwards in the “Chargers” to “Polaron Chargers Upgrade”. In the right - larger - part of the

program, will appear the following window:

Click on the button “Open File” and

select, in the Explorer window that

appears, in the folder in which the

previously downloaded and unzipped

rmware les, ending with “... .bin”, are

located:

Open the le you may deem suitable

with a double click ...

… And afterwards follow the instructions displayed below

in the update program row.