Operation Manual

ManualsBrandsGraupner ManualsMiscellaneousPOLARON EX-1400 - GR-S2018

English

INNOVATION & TECHNOLOGIE

18 19

Input of an individual battery name

Tap the top box while continuously until an input keyboard for entering a battery name appears.

Field Description

„BATTERY NAME“ eld of the battery name

abc / 123 / ABC switch between the character tables

Spc (Space) Tap this button to insert a space

Del (Delete) Touching this key deletes the rearmost characters

Clr (Clear) Tap this button to delete the current battery name

For data input screen, turn back by pressing the left down ESC button.

The parameters in the input elds “battery type, cell number“ “battery capacity“

change when activated by tapping the desired parameter eld with the INC /

DEC buttons placed at the bottom of the display.

Within a memory eld your settings will be taken from the “upper“ setting in the

“lower“ data area after tapping the lower space eld and alternatively when leaving the menu by

pressing the bottom left ESC button.

To copy your settings to a different location, you also tap the lower space eld of the data area and

then choose now highlighted in blue box with the INC / DEC buttons to select the target. Tapping

the CPY button copies the current parameters of the “upper“ adjustment range in the selected

location.

WARNING

Make absolutely sure that the correct parameters are entered! Incorrect eld valu-

es can not only seriously damage charger and / or battery packs but also result in

re!

Press the ESC button on the bottom left to exit the menu.

Menu CHARGE

Add now the menu “PROFILE” key data concerning your batteries in this menu

“CHARGE” with the corresponding charging parameters. To do this, choose

the battery type and cell number matching the battery to charge. So If neces-

sary, tap with your nger or the pen supplied in a lateral recess of the device

to the “memory eld”. In the blue area now select via the INC / DEC buttons at

the bottom of the display the desired memory location 0 ... 19.

Tap again the eld to deactivate the choice.

Within the set for the selected location in the menu “PROFILE” now they

can be adjusted specications regarding battery type and cell count, the

charge current as well as other parameters as described below in this menu

“CHARGE”.

Adjustable Parameters

• NiCd, NiMH batteries

Parameter Short description

Current The default value, inherited from the “Proles” menu to 1C, can be adapt-

ed within the “Maximum capacity” of the charge port rate and the charger

features, see display 2 of the menu “Settings” on page 43, in the range of

0.1 to a maximum of 30 A.

Delta Peak Sensitivity adjustment of the delta Peak in mV per cell. Default: 5 mV /

cell NiMH (Setting range: 0 ... 15 mV) and NiCd 7 mV / cell (range: 5 ...

25 mV)

Trickle charge OFF, 50 to 500 mA in 50 mA steps, AUTO (default value: OFF)

Maximal tempera-

ture

Setting range: 10 ... 80 ° C (Default: 50 ° C). If the temperature sensor is

connected, the charge process is stopped automatically when that tem-

peratures is exceeded.

Maximal capacity Setting range: 10 ... 150% in 5% increments, OFF (default value:

120%). To avoid damage from overcharging, the charge stops when the

limit is exceeded.

Safety timer Setting range: 10 ... 900 minutes in 5 minute increments OFF (de-

fault value:

120 min). To avoid damage from overcharging, the charge stops when

the limit is exceeded.

• LiFe, LiIo and LiPo batteries