Operation Manual

9. Mode exchange of throttle stick for Mode 1 and Mode 2
Unscrew the transmitter’s rear case
and remove the rear case and disas
-
semble the tension spring from the
centering cam in the elevator gimbal
of mode 1 transmitter with tweezers
Unscrew the tension spring control
bolt in the elevator gimbal of mode 1
transmitter
Disassemble the centering cam
form the gimbal
Disassemble 2pcs of leaf spring
in the throttle gimbal of mode 1
transmitter
Tension spring
Centering cam
Centering cam
1
3
2
4
5
7
6
8
Unscrew the tension spring control
bolt in the elevator gimbal of mode
1 transmitter
Assemble 2pcs of disassembled leaf
spring from the throttle gimbal of
mode 1 transmitter into the elevator
gimbal and adjust the bolt for the
desired control
Screw the disassembled bolt from
the throttle gimbal of mode 1 trans
-
mitter into the elevator gimbal to x
the controller
Assemble the disassembled
centering cam form the elevator
gimbal of mode 1 transmitter into
the throttle gimbal pin
6