Operation Manual

13. Trainer (Aircraft and Helicopter)

The mz-12 has the trainer function. The function activates when you select Teacher, Pupil

and Normal mode. You may use this function by wireless and wired.

- The teacher mode programming setup

Press the direction button to highlight the teach pupil then press the ENT button to access

the function. The black dot is on the NO.1 channel indicating NO.1 channel is selected

and the T (Teacher/ the default mode) is assigned. Press the direction button to select the

channel and press the ENT button to select the T (Teacher) or –P (Pupil). After completing

to select the desired mode in all channels, press the direction button to select the hyphen.

Press the ENT button then the popup message “push desired switch into position on”

appears. Move the switch that you wish to use as the RF switch then the corresponding

value appears (The trainer function is on/off when that switch is moved). Press the direction

button to select the n/a in the BIND. The transmitter gets ready to bind to the pupil transmit-

ter now.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press