Operation Manual

- Batt type
Press the direction button to highlight the basic sett then press the ENT button to access the
Batt type line. Press the ENT button to highlight the value then press the direction button to
adjust the value. Press the ESC button to remove the highlight. You may select the function of
which you wish to adjust the value by pressing the direction button.
11. Basic sett (Aircraft and Helicopter)
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
• Batt type
The battery that is used to the transmitter can be selected. NiMH and LiPo are available.
• Batt warning
When the transmitter voltage drops below the preset voltage, the transmitter beeps the alarm
to warn the low battery.
• Touch sense
The touch sense is used for adjusting the sensitivity of the button. The available values are
1~10. The lower the value, the more sensitive.
• Contrast
Use the contrast to adjust contrast of the LCD. The available values are -20~20. The lower
the value, the more bright.
• Display light
The backlighting time is adjusted.
• Rf country
mz-12 offers 2 modes of GENERAL and FRANCE. You need the France RF setting to comply
with France regulations in FANCE. France RF setting should only be turned on when operat-
ing your transmitter in France outdoors.
• Voice volume
The volume of the telemetry is adjusted.
• Beep volume
The beep volume is adjusted.
press
press
press
press
49