Operation Manual

- Pitc->thro
Press the direction button to select pitc->thro line and press the ENT button to access the
pitc->thro function. 0% of the point 1 value is highlighted. Move the throttle stick to the
high position step by step then the point 2,3,4,5 is selected in turn. After selecting the point
number, press the direction button to adjust the desired value. Press the ESC button to
return to the previous screen.
NOTE : The default values of the point 2 and point 4 is remained not to be programmed so
the “deact” is displayed at the value box. You may activate and adjust the desired value by
the direction button if you want. When the value of the point 2 and point 4 are activated,
the basic value of point 2 is 25% and point 4 is 75%
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
press
press
press
press
press
41