Operation Manual

- Flap->elev
Press the direction button to select the ap -> elev line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button to
remove the highlight. Press the direction button to select the hyphen then press the ENT button.
The popup message “push desired switch into position on” appears. Move the switch then the
corresponding value appears (The ap -> elev mixing is on/off when the switch is moved). Press
the direction button to select other mixing.
- Flap->aile
Press the direction button to select the ap -> aile line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button to
remove the highlight. Press the direction button to select the hyphen then press the ENT but-
ton. The popup message “push desired switch into position on” appears. Move the switch then
the corresponding value appears (The ap -> aile mixing is on/off when the switch is moved).
Press the direction button to select other mixing.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
press
38