Operation Manual

- Ail->rudd
Press the direction button to select the ail -> rudd line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button to
remove the highlight. Press the direction button to select the hyphen then press the ENT but-
ton. The popup message “push desired switch into position on” appears. Move the switch then
the corresponding value appears (The ail -> rudd mixing is on/off when the switch is moved).
Press the direction button to select other mixing.
- Ail->ap
Press the direction button to select the ail -> aps line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button to
remove the highlight. Press the direction button to select the hyphen then press the ENT but-
ton. The popup message “push desired switch into position on” appears. Move the switch then
the corresponding value appears (The ail -> aps mixing is on/off when the switch is moved).
Press the direction button to select other mixing.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
press
press
34