Operation Manual

- Quick link trim
Use the quick link trim function to program the appropriate trims of the quick 2 and quick 3 in the
quick link. The user can program the trim in advance to cope with the unexpected situation such
as the ight with the strong wind and match the ight situation of the takeoff , thermal and speed
of the glider. If the switch is ON, the corresponding trim is activated so the user do not need to
set these trims every time.
Here is an example in case of motor at C1 (no) , tail type (normal) , aile/ap (2aile 2ap) at the
model type Press the ENT button to access the function. The cursor is on the FLA value in the
normal line then press the ENT and the direction buttons to highlight and adjust the desired
value. Press ENT button and direction button to remove the highlight and select the AIL value.
The AIL value and ELE value can be adjusted in the same method with the FLA programming.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
NOTICE: The programming value of the quick link trim depends on the motor at C1, Tail type,
Aile/ap
press
press
press
press
press
press
18