Operation Manual

- Aile/ap
Use the Aile/ap functions to program aile/ap mix to match your airplane. 5 aile/aps (1aile,
1aile 1ap, 2aile, 2aile 1ap, 2aile 2ap) are available. The correct value should be matched
each other since the some value is not match to the others, refer to the below table. Press the
direction button to select the aile/ap line then press the ENT button to highlight the value. Press
the direction button to choose desired value then press the ESC button to remove the highlight.
Press the ESC button again to return to the previous screen.
NOTE : The correct value should be matched each other since the some value is not
match to the others, refer to the table.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
Motor at C1
Tail type
Aile/ap
no, no/inv
1 aile 1 ap
normal,V-tail,delt/FlW
2 aile
1 aile
2 aile 1 ap
2 aile 2 ap
1 aile 1 ap
2 elev sv
2 aile
1 aile
2 aile 1 ap
1 aile 1 ap
normal,V-tail
Idle re, idel fr
2 aile
1 aile
2 aile 1 ap
2 aile 1 ap
2 aile 2 ap
Delt/FlW
2 aile
1 aile 1 ap
2 elev sv
2 aile
1aile
press
press
press
press
press
press
press
16