Operation Manual

Press the direction button to select the value,+150%,. Place the throttle stick at the desired
position and press the ENT button then the adjusted value is applied (The adjusted value is
activated when the throttle stick is in that position).
NOTE : the value,+150%, is the throttle stick position where the cut off function is activated.
Press the direction button to select the hyphen then press the ENT button. The popup
message “push desired switch into position on” appears then move the switch to the desired
position (The cut off function is activated when the switch is moved to that position)
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
ENT
ESC
TEL VIW
press
press
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
- Tail type
Use the Tail type functions to program the tail mix to match your airplane. 4 tail types (normal,
V tail, delt/w, 2elev sv appear) are available. The correct value should be matched each other
since the some value is not match to the others, refer to the below table.
Press the direction button to select the tail type line then press the ENT button to highlight the
value. Press the direction button to choose desired value then press the ESC button to remove
the highlight. Press the ESC button again to return to the previous screen.
ENT
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
15