Operation Manual

2. m.type + quick (Aircraft)
The m.type+quick function allows to program the various function of Airplane and Helicopter
model. Always choose model type (Aircraft or Helicopter) before programming any other
function of the selected model type. The function that can be programmed is different
depends on the model type, Aircraft or Helicopter.
• Motor at C1 : Use the motor at C1 function to set the direction of the throttle channel in the
Aircraft and program to use the throttle channel as the brake in the glider.
• Tail type : Use the Tail type functions to program the tail mix to match your airplane.
4 tail types (normal, V tail, delt/w, 2elev sv appear) are available.
• Aile/ap : Use the Aile/ap functions to program aile/ap mix to match your airplane 5 aile/
aps (1aile, 1aile 1ap, 2aile, 2aile 1ap, 2aile 2ap) are available.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
press
- Copy mod->mod
The model mem is highlighted in the menu screen then press the ENT button. The cursor is
on the select model line. Press the direction button to select the copy mod ->mod line then
press the ENT button to access to the function. When the copy from model screen appears,
press the direction button to highlight the model you want to copy then press the ENT button
to accept. When the copy to model screen appears, press the direction button to highlight the
model memory to copy to then press the ENT button to accept. The message “to be copied
YES or NO” appears on the screen. Press the direction button to highlight YES then press the
ENT button to complete to copy. The copy mod ->mod is automatically displayed. If you press
the ENT button after selecting the select model line then you may check the copied model.
12