Operation Manual

- Select model
In the home screen, press the ENT button then the model mem is highlighted. Press the ENT
button to access the function.
Press the direction button to select the model then press the ENT button to access the Sel
model type screen. Press the direction button to highlight the desired model type (Aircraft
or Helicopter) then press the ENT button to select the model type. The home screen is
displayed and the popup message “Bind N/A with the highlight on OK” appears then press
the ENT button to bind. The rx bind screen automatically appears then you may bind the
transmitter to the receiver according to the bind procedure.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
- Model name
When the model mem is highlighted, press the ENT button then the cursor is on the
select model line. Press the direction button to select the mod name line then press the
ENT button to access to the function. Press the direction button to highlight the desired
character then press the ENT button to accept. Repeat the process until completing. The
name will display on the model name line. Press the ESC button to get back to the model
mem screen.
NOTE : Pressing the direction button to highlight the blank and pressing the ENT button
will erase the current character.
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
10