Operation Manual

68
Program description: reserving a new memory
position of the throttle limiter CTRL 6. For both model
types this situation only changes once you have carried
out the appropriate assignments in the “Transmitter
control settings” menu.
If you wish to use a newly initialised model memory,
then this MUST first be “bound” to a (further) receiver
before any servos connected to the receiver can be con-
trolled from the transmitter. For more information on this
please refer to the “Binding” section on pages 80 and 88.
You will find a description of the basic steps for program-
ming a fixed-wing model aircraft in the Programming
Examples section starting on page 164; for model
helicopters the equivalent section starts on page 186.
The following menu descriptions are arranged in the
order that they are listed in the individual menus in the
multi-function list.