Operation Manual

ACROBATIC Block Diagram ACROBATIC “AC”
Model Type Described
52 Fixed Wing Models
The basic version of this program allows Motor (or
airbrake), Aileron, Elevator, Rudder, Flap and
Spoiler. Receiver outputs 5 and 8 are available for
auxiliary functions, e.g. retractable undercarriage,
mixture control for the motor, etc. Also included is a
ready made mixer for Elevator  Flap mixing. Other
mixing functions can be achieved using the 3 freely
programmable mixers available.
The Combi-mixer for aileron  rudder mixing is
available. The main advantage of the ACROBATIC
program is that many different tasks can be achieved
by activating the preset mixers available.
The “Automatic Landing” program allows control of
the motor, elevator, flaps and spoilers in a freely
programmable set-up. The “Automatic Manoeuvre”
program can be set-up to provide two different Snap-
Roll directions by controlling the elevator, rudder and
aileron whilst the motor servo is driving to a fixed
position.
The wing programs allow Delta and Flaperon models
to be accommodated. With Delta (or tailless)
models, the elevator and aileron functions are mixed
to the common surfaces full width along the trailing
edge. The surfaces are moved in the same direction
for elevator control and in opposition for aileron
control. The servos must be connected to receiver
outputs 2 and 6.