User Manual

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. Id.-Nr. 0062273 3/2011
- 12 -
Parts List - ELEKTRO-ROOKIE QR
Part
No.
Description No.
off
Material Dimensions, mm
1 R.H. fuselage shell 1
SOLIDPOR®
Ready made
2 L.H. fuselage shell 1
SOLIDPOR®
Ready made
3 Fuselage stiffening tube 1 CFRP 10 / 9 Ø x 450
4 Control “snake” outer sleeve 2 Nylon 1.9 Ø
5 Swivel pushrod connector 2 Steel M2, ready made
6 Servo output lever 2 ABS Ready made
7 Self-locking nut 2 ABS Ready made
8 Motor mount 1 ABS Ready made
9 Cheesehead screw 4 Steel M3 x 5
10 COMPACT 300 7.4 V power set 1 Steel / plastic Ready made
11 Threaded insert 1 Nylon M4, ready made
12 Canopy retainer clip 1 ABS Ready made
13 Canopy 1
SOLIDPOR®
Ready made
14 Canopy retainer spigot 1 ABS Ready made
15 Control surface horn 4 ABS Ready made
16 Rudder pushrod 1 Steel 0.6 Ø x 708,
ready made
17 Spigot 1 ABS Ready made
18 Elevator pushrod 1 Steel 0.6 Ø x 774,
ready made
19 Rudder horn 1 ABS Ready made
20 Tailplane 1
SOLIDPOR®
Ready made
21 Tailplane spreader plate 1 ABS Ready made
22 Countersunk screw 1 Nylon M4 x 25
23 L.H. wing panel 1
SOLIDPOR®
Ready made
24 L.H. spar channel cover 1
SOLIDPOR®
Ready made
25 R.H. wing panel 1
SOLIDPOR®
Ready made
26 R.H. spar channel cover 1
SOLIDPOR®
Ready made
27 CFRP wing spar 1 CFRP 10 / 8 Ø x 600
28 Decal 12 Self-adhesive film Sheet
29 Propeller 1 Plastic 160 x 80
30 Grubscrew 22 Steel M3 x 3
31 Aileron pushrod 2 Steel Ready made
32 Velcro tape 1+1 Plastic 33 x 25 x 3
33 Aileron servo / aileron gap cover L+R Adhesive film Oversize
Environmental Protection Notes
The presence of this symbol on a product, in the user instructions or the packaging, means that you must not
dispose of that item, in the ordinary domestic waste when the product comes to the end of its useful life. The
correct method of disposal is to take it to your local collection point for recycling electrical and electronic
equipment.
Individual markings indicate which materials can be recycled and re-used. You can make an important
contribution to the protection of our shared environment by re-using the product, recycling the basic materials or
re-processing redundant equipment in other ways.
Dry cells and rechargeable batteries must be removed from the device and taken separately to a suitable battery disposal
centre.