User manual

132
Program description: Telemetry menu
VOLT:
MODELTIME:
BATTERYTIME:
RUNTIME:
STOPWATCH:
TIME:
RECEIVER
Select the desired menu line with the arrow buttons
cd of the left or right-hand four-way button …
VOICE TRIGGER
REPEAT 1SEC
TRIG
TRANSFER
RECEIVER
3
1
VARIO
7
… then press the central SET button of the right-hand
four-way button to call up the selected sub-menu:
TEMP:
STRENGTH:
VOLT:
LOWVOLT:
In this menu you can select ( ) or de-select ( ) the
chosen speech output after using the arrow buttons
cd of the left or right-hand four-way button to select
the desired line, followed by a brief press of the central
SET button of the right-hand four-way button:
TEMP:
STRENGTH:
VOLT:
LOWVOLT:
SENSOR
This line only appears if you have already activated one
of the “RX …” sub-menus of the “SIMPLE DATA VIEW”
menu, and then returned directly to the “VOICE TRIG-
GER” menu:
VOICE TRIGGER
REPEAT 1SEC
TRIG
TRANSFER
RECEIVER
3
1
SENSOR
VARIO
7
For example, if you selected the “RX + VARIO” option,
then selected the “SENSOR” line and pressed the cen-
tral SET button of the right-hand four-way button, you
will see the display shown below:
ALT :
MAXALT :
MINALT :
As described in the left-hand column, you can also
select ( ) or de-select ( ) any available speech
output by briefl y pressing the central SET button of the
right-hand four-way button after you have selected the
desired line.
Note:
The voice output you select here is completely inde-
pendent of the “VARIO” outputs.