User manual

233Program description - Profi trim | Winged models
CTL
Profi trim
AI
AI
FL
FL
TR
CTL
ON/OFF
ON ON OFF OFF
–––
–––
–––
–––
–––
SET SET SET SET
The second line of this menu is for selecting transmit-
ter control assignments which appear advantageous
from the many controls available on the transmitter.
To assign a transmitter control, use the selection keys
to navigate to the desired column then tap briefly on
the center SET key of the right four-way button …:
Profi trim
FL
TR
CT
ON/OFF
OFF
–––
–––
SET SET SET SET
Move desired
control adj.
… and move the desired transmitter control:
Profi trim
AI
AI
FL
FL
TR
CTL
ON/OFF
ON ON OFF OFF
Lv1
–––
–––
–––
–––
SET SET SET SET
The mid-point position of enabled proportional con-
trols corresponds to the programmed flap setting.
The trim range for a given transmitter control is about
±25 %. However, these “trim” controls are only effec-
tive when, as described in section “ON/OFF” further
below, has been assigned a profi-trim switch and
switched on.
An active transmitter control assignment can be
erased with a simultaneous tap on the  or 
selection keys of the right four-way button (CLEAR).
Note:
Trim values retain their settings until the next closure
of the ON/OFF switch, even then when the trim func-
tions in the “Control” line have been temporally reset
to “free”.
ON/OFF
The “ON/OFF” line is used to assign a switch which
permits the profi-trim function to be switched on/off
globally. This assignment is done in the manner de-
scribed in the section “Physical control, switch and
control switch assignments” on page 68. Another
option is to select an “FX” switch from the range of
expanded switches, if you wish the “Profi-Trim” option
to remain switched on permanently.
In this context, pay attention to the following depen-
dencies:
• Only when the ON/OFF switch in the “Trim” line is
set to “ON” will the trim functions assigned to trim
controls in the “TR” line be able to affect trim within
a range of ±25 %.
• As soon as the ON/OFF switch is opened or
erased, the current trim positions will be stored
and the selected trim controls become ineffective.
A tap, at the same time, on the  or  selection
keys of the right four-way button (CLEAR) when a
switch assignment is active will reset a field’s value
back to “---”:
Profi trim
AI
AI
FL
FL
TR
CTL
ON/OFF
ON ON OFF OFF
Lv1
Lv2
–––
–––
FXI
SET SET SET SET