User manual GRP-2012

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. We reserve the right to introduce modifications. #0057828 03/2007
5
• Press the rubber grommets into the mounting
lugs of the rudder servo, and push the brass
sleeves through them from the underside. Fit the
servo in the opening in the hardwood servo
plate, and secure it with the retaining screws
supplied. IMPORTANT: take care not to
damage the servo lead when you fit the screws.
• Remove the hatch over the rudders, and set both blades to the “straight ahead” position. The output
lever should now be fitted to the rudder servo, exactly at right-angles to the pushrod. Tighten the
output screw to retain the output lever.