User's Manual

44 / 48
S1008_X-8E_jh_V1
Firmware Update - Receiver
Updates to the receiver’s firmware are made via the telemetry
socket using a PC running Windows XP, Vista or 7 with the
included USB interface (order No. 7168.6), and adapter lead,
(order No. 7168.6A or 7168.S).
The programs and files required can be found in the Download
area for the corresponding products at:
www.graupner.de.
Connect the adapter lead to the USB interface. The connectors
are reverse polarity protected: note the small chamfers on the
sides. Never use force – the connectors should engage easily.
Connect the adapter lead to the receiver's socket 3 (CH 3). The
connectors are reverse polarity protected: note the small cham-
fers on the sides. Never use force – the connectors should
engage easily.
Update process
Ensure that the adapter lead is plugged into the receiver. Start
the Firmware Update Studio.
Select the correct COM-Port "Silicon Labs CP210x USB to
UART Bridge" under "Port Select" to which the USB cable is
connected.
To download the file, go to the menu and select the item: "HoTT
device". In the pop-up window, press the "Auto Download"
button. Once the firmware file is displayed, start the update by
pressing the "File Download" button.
If the file has been previously downloaded, go to the menu and
select the item: "HoTT device". In the pop-up window, press
the "File Download" button and select the previously-down-
loaded firmware file with the *.bin extension. Once the firmware
file is displayed, start the update by double-clicking on the file.
<CH3