User's Manual

43 / 48
S1008_X-8E_jh_V1
Firmware Update - Transmitter
NOTE
In case of transmitter firmware update, carefully observe the follow-
ing instructions. Before every update it is recommend all model data
on the SD card be saved externally (refer to M-SEL section).
UPDATE USING THE BACK-SIDE USB SOCKET
Use a PC or laptop with the Windows XP, Vista, 7 or 8 OS.
Download an up-to-date software package from the Internet at
www.graupner.de and unpack it onto a PC or laptop. Connect
your switched-off transmitter with the PC or laptop by using the
USB cable (USB-A to mini-B-USB, 5 pole), which is supplied as
a standard accessory. Plug one end of the USB cable directly
into the 5 pole micro-USB port at the rear side of the transmitter
and the other end into a free USB port of the computer. For
more information, please refer to the update instructions PDF file
located in the respective software package.