User's Manual

40 / 48
S1008_X-8E_jh_V1
A.B.S
A.B.S setup menu.
A.B.S. enables a better braking response, since the brake is
actuated in pulses.
ACT: Press the button under ACT to choose between INH
(inhibit/off) and ON.
DUTY: To set the atio between pulse and pulse pause (see
image below), press the <+ or -> keys to raise or lower value.
Press the curved arrow key to reset to the default value (0).
T/POS: To set the point on the brake lever path from which the
A.B.S. will become active, press the <+ or -> keys to raise or
lower value. Press the curved arrow key to reset to the default
value (30%).
MOV: To set the pulse height (see image below), press the <+
or -> keys to raise or lower value. Press the curved arrow key to
reset to the default value (50%).
CYC: To set the pulse length (see image below), press the <+
or -> keys to raise or lower value. Press the curved arrow key to
reset to the default value (240ms).
DELAY: To set the delay time of the A.B.S. response (0 - 1 s),
press the <+ or -> keys to raise or lower value. Press the curved
arrow key to reset to the default value (0.00s).
BACK
NORMAL
SERVO
ACT
INH
DUTY
T/POS MOV
CYC
DELAY
0
30% 50%
120ms
0.00s
DUTY
CYC
MOVE