User's Manual

39 / 48
S1008_X-8E_jh_V1
ST MODE (steering)
ESC MODE (2 drives)
TANK
Use the ST MODE to mix the throttle and the steering on a
tracked vehicle and emit on Channel 1 and 2. Actuate steering
by adjusting SPD RATE of the left and right tracks speed.
ST MODE: Select the button to highlight and press to choose
between: TYPE 1 = standing rotation only, TYPE 2 = driving
rotation only. Press the curved arrow key to reset to the default
(TYPE1).
SPD RATE: To set the maximum speed of the drive, highlight
the percent button in the SPD RATE line and press the <+ or ->
keys to increase or decrease value. Press the curved arrow key
to reset to the default (100%).
BOAT
Use these mixers to actuate a second drive (ESC).
ST -> 3CH: To adjust the mixing rate from steering to Channel
3, press the <+ or -> keys to increase or decrease value. Press
the curved arrow key to reset to the default (0%).
3CH -> ST: To adjust the mixing rate from Channel 3 to steer-
ing, press the <+ or -> keys to increase or decrease value. Press
the curved arrow key to reset to the default (0%).
BACK
NORMAL
SERVO
S/MODE
TYPE1
ST MODE
TANK
SPD RATE 0%
BACK
NORMAL
SERVO
S/MODE
ST >> CH3
BOAT
CH3 >> ST 0%
0%