User's Manual

27 / 48
S1008_X-8E_jh_V1
Change the values in an input field
The following three buttons are visable on the lower part of the
display of many of the following menus. To raise or lower a value
by pressing the <+ or -> buttons. Reset the default value
through the curved back-arrow button.
M-SEL (Model Selection)
Model settings can be managed and saved into memory slots
by choosing from the following options:
SEL - Change active model memories.
IMP.M - Import model memories from the SD card.
EXP.M - Export model memories to the SD card.
RES - Reset a model memory to the factory presets.
Warning: All personal settings will be deleted!
CPY - Copy the actual model memory in a new model mem-
ory.
REVERSE (Servo Reverse)
The servo operates in two directions:
Normal - Reverse
To change servo directions, tap the NORMAL/REVERSE but-
ton of the related servo to toggle between options. If changing
the throttle direction, a safety warning will appear. Tap YES or
NO to verify the selection and the change will take effect.
TRIM
This trim function allows for the entire servo travel to be moved,
i.e. full deflection position changes.
In the second line is displayed the respective trim value that has
been set through the buttons.
Tap on the related button. Change the values by pushing the <+
or -> keys. Press the curved arrow key to reset to the default
value (0%).
BACK
MODEL 1
01
02
03
04
05
06
07
NEXT
MODEL 2
SEL
MODEL 3
IMP.M
MODEL 7
MODEL 6
CPY
MODEL 5
RES
MODEL 4
EXP.M
08
MODEL 8
09
MODEL 9
BACK
NORMAL
NORMAL
SERVO
NORMAL
NORMAL NORMAL
ST
TH
CH3 CH4
BACK
NORMAL
NORMAL
SERVO
NORMAL
NORMAL NORMAL
ST
TH
CH3 CH4
Warning
Are you sure?
YES NO
BACK
0%
SV/TR
ST
NORMAL
SERVO
TH
TX/TR
0%
0% 0%
CH 3 CH 4
0%
SV/TR
TX/TR
0%
0% 0%