User's Manual

26 / 48
S1008_X-8E_jh_V1
Display warnings
Tap the exclimation point symbol in the top line of the
Start Display to open the warnings display screen-
showing the current values for transmitter voltage (TX
VOLT), receiver voltage (RX VOLT), signal strength
(STRENGTH), speed controller current (ESC CUR.)
and speed controller voltage (ESC VOLT).
Acoustic (A-) and optical (S-) warnings can be activated or
deactivated by tapping the ON or OFF buttons.
Resets the alarms by tapping Clear (CLR).
Voltage display calibration
From the Main Menu, tap on the battery symbol to pull up
the voltage calibration display. Calibrate the voltage dis-
play as follows:
Voltage display calibration step by step:
1. Measure the battery voltage with a voltmeter.
2. Tap on the Cali. Data button.
3. Enter the data by changing the value by 2 or 10 unit
incriments.
4. To SAVE tap and confirm the safety query through
YES.
5. The new value is displayed under Tx Volt
TX
3.9V
4.8V
RX
RX
000:00.0
ST
TH
ST TRIM
TH TRIM0%
100%
0%
0%
CH3
CH4
BK D/R
ST D/R
PS1
+100%
100%
PS2OFF OFF
M - 1
MODEL 1
NORMAL
O.TIME 0 : 23 : 02 B.TIME 0 : 11 : 59
CH3 CH4
TX VOLT 3.9 V 0
RX VOLT 0.0 V 0
ESC VOLT 0.0V 0
ESC CUR. 0.0A 0
STRENGTH 0% 0
BACK CLR OFF
ON
A-
S-
BACK
+2
34814
+10
-2
-10
SAVE
3.95V
Tx Volt
Cali. Data
NORMAL