User's Manual

23 / 48
S1008_X-8E_jh_V1
Voice Trigger
Only connected sensors and receivers are active.
REPEAT: If the REPEAT function is activated (via SW/FUN
menu, VOICE RPT button), set the repetition frequency of the
voice output here.
TRIGGER: Switch ON or OFF voice output from play list.
FIXED VOICE: Tap to open a drop-down menu of all voice
announcemnts available on the SUMD-V2 system.
Device Management
If the SUMD-V2 system's channels are set in the RF SET menu
at "CH FUNCTION", this menu manages the administration of
all devices connected to the receiver. (display only)
Device List
This menu shows a list of all connected devices and to which
receiver port they are connected. Devices can be assigned to
channels here.
New Device
Plug in a new device and push FIND. A pop-up menu will appear
showing the device is being located and assigned to a device
list number. Once found, tap OK.
Repeat this process for each new device to be assigned to the
list.
BACK
NORMAL
SERVO
REPEAT
10s
--
OFF
OFFTRIGGER
FIXED VOICE
TRANSMITTER
PLAY LIST
CAR ESC
GENERAL
VARIO
RECEIVER
SERVO
AIR ESC
ELECTRIC
GPS
BACK
NORMAL
SERVO
Device List
LIST
New Device
Live Log Device
FIND
>>
BACK
NORMAL
SERVO
No
00
-
01
02
03
04
05
Device CH PORT
RECEIVER
-
BACK
NORMAL
SERVO
Device List
LIST
New Device
Live Log Device
FIND
>>
FINDING
NO. 00
OK