User's Manual

15 / 48
S1008_X-8E_jh_V1
Installing the steering wheel adapter
The steering wheel position can be adjusted 10 degrees through
an adapter.
1. Remove the steering wheel.
2. Remove the four long screws under the wheel.
3. Remove the steering wheel mechanism and disconnect
the connector.
4. Adjust the adapter to preferred position and secure with
the four short screws.
5. Reconnect the connector
6. Install the steering wheel mechanism on the adapter part
and reattatch the steering wheel.
Attention After the conversion, check all steering wheel func-
tions, buttons and rotary controls before operating the model
again!