User Manual

Operation
Battery Connection
• Only use optional manganese dry battery or NiCd /NiMH 1.2volt, individual AA size rechargeable
battery. (LiPo battery must not be used.)
• Remove the cover and install your battery to battery socket. Then, replace the cover making sure it
is closed securely.
• When low voltage warning alarm is activated, please use new battery or recharge the used battery.
Please make sure the correct polarity when installing your battery.
Low-voltage warning for transmitter battery
Please charge Alkaline 4 cell or Nixx 4 cell battery before use. When it will beep continuously due to
low voltage warning, please stop an operation, then recharge your battery or replace it.
(Do not use Lixx battery and please only use Alkaline or Nixx battery.)
Battery Charging
If rechargeable battery is in use, you can charge it up to 150mA with optional charging adapter.
We may notice that little heating will be occurred during use, which means it is working properly. Now
that this product features 4 cell battery packs, it is allowed to use within its specification. Otherwise, it
may cause damage to your model.
Cautions
The improper use will cause fire. So please keep the safety rules.
Reference picture (Correct polarity)