User Manual

ManualsBrandsGRAUPNER ManualsElectronics2.4GHz Radio Control Computer System

X-4S MANUAL

Contents

Before use-------------------------------------------------------

• Support and Service-----------------------------------------------

- Customer Support------------------------------------------------------------

- Internet sales site -----------------------------------------------------

- A/S support & Warranty information ------------------------------------------------------

- OPENHOBBY A/S SUPPORT AND SERVICE CENTER -------------

• Box Contents-----------------------------------------------------------------

• Safety Warning Notes-----------------------------------------------------------

• System Features-----------------------------------------------------------------

• Specification-------------------------------------------------------------------

• Product Description--------------------------------------------------------------

• HoTT

• Operation

• Receiver installation

• Steering & Trigger tension adjustment

• Steering wheel position adjustment

• Trigger Angle Adjustment

• Installation for left-handed users

• Binding and Range test

• Control Switch Functions-------------------------------------------------------------------P7

• Fail Safe mode Configuration -------------------------------------------------------------------------

• Trigger and Steering Calibration ------------------------------------------------------

• LED and Buzzer Indication------------------------------------------------------------------------

• Receiver port Description

• Smart Box (Configuration by Telemetry)

• Safety

BEFORE USE

Thank you for purchasing Graupner/SJ X-4S HoTT 2.4GHz Radio System. This system is extremely

versatile and may be used by beginners and pros alike. In order for you to make the best use of your

system, please read this manual carefully. If you have any difficulties while using your system,

please consult the manual, our online Frequently Asked Questions (on the web pages referenced

below), your hobby dealer, or the Graupner/SJ Service Center. Due to unforeseen changes in

production procedures, the information contained in this manual is subject to change without notice.

SUPPORT AND SERVICE

• Customer support

We are happy to assist you with any question by e-mail or phone, Customer service hours are 9 AM

to 5 PM (Pacific Standard Time) during the workweek, Monday through Friday. E-mailed questions will

be answered as soon as possible.

• Internet sales site

Please visit us at www.openhobbby.com

, for more information

• A/S support

During the warranty period, we can repair this product at no cost for products that have become

faulty under normal operating conditions. For non-functional products that are past the expiration date

of the warranty or have been improperly used, we would be happy to repair this product for an

appropriate amount of cost to the consumer

• Warranty information

Summary of content (17 pages)

PAGE 1
X-4S MANUAL Contents Before use------------------------------------------------------• Support and Service----------------------------------------------- Customer Support------------------------------------------------------------ Internet sales site ----------------------------------------------------- A/S support & Warranty information ------------------------------------------------------ OPENHOBBY A/S SUPPORT AND SERVICE CENTER ------------• Box Contents--------------------------------------------------
PAGE 2
Refer the WARRANTY CARD in the Package OPENHOBBY A/S SUPPORT AND SERVICE CENTER 기존 사용내용 기재 BOX CONTENTS X-4S HoTT Transmitter Warranty Card GR-4 Receiver Temperature / Voltage Sensor (S8362) Battery Holder Alkaline 4 cells Manual SAFETY WARNING NOTES • Never operate your car or truck in a crowded street with traffic. Especially, do not drive in a place near railway, chemical substance, gas to prevent any damage.
PAGE 3
System Features 1. HOPPING TELEMETRY TRANSMISSION (HoTT) The use of up to 35 hopping channels provides advanced reliable operation while keeping from any external interference. 2. Designed for beginners, X-4S HoTT Transmitter is the best choice for those who enjoy car, boat, and tank models. When optional Graupner/SJ Telemetry sensor or temperature sensor is used, you may check the real-time information such as model voltage, user programmable warnings. It is easy to check from your transmitter. 3.
PAGE 4
(2) GR-4 Receiver Channel 2 CH Frequency 2400~2483.5 MHz Modulation FHSS Operating Voltage 3.6~8.4V Operating Output Power 60mW Operating Current 35.0mA Display One LED (red) Extra Function available (Port3) Fail Safe Free/Fail safe Temperature Sensor Warning (T/V Connector) Port4 (50~150℃) Low voltage warning alarm (T/V Connector) Port4 (1.0~25.5V) Telemetry Sensor (B/T Connector) Port3 Size 30x21x14.3 mm ( 1.18x0.82x0.56 in. ) Weight app. 5.5 g (0.
PAGE 5
Operation Battery Connection • Only use optional manganese dry battery or NiCd /NiMH 1.2volt, individual AA size rechargeable battery. (LiPo battery must not be used.) • Remove the cover and install your battery to battery socket. Then, replace the cover making sure it is closed securely. • When low voltage warning alarm is activated, please use new battery or recharge the used battery. Please make sure the correct polarity when installing your battery.
PAGE 6
Receiver installation 1. Install your receiver on the flat surface to avoid any oscillation. 2. Be aware you should keep your antenna at least 10mm away from any power wires to prevent interference. 3. Be sure not to cut off any antenna wire, as it will shorten your operating range.
PAGE 7
Throttle Trigger Adjustment Installation for Left-handed users 1. Disconnect your bolts and coverage. 2. Disconnect steering wheel part. 3. Disconnect transmitter connector. 4. Install your steering wheel part on your left side. Then, install the connector again then, coverage and bolts. Now, your transmitter can be used for left-handed users.
PAGE 8
Binding & RF Range Test BIND Press and hold Bind button for 3 sec while your receiver is powered on and then LED indicator is off. Now press Bind button of your transmitter and then receiver’s LED indicator is off. RF RANGE TEST When BIND button is touched after the connection between transmitter and receiver, RF RANGE TEST is now activated. RF TEST is continued during 90 seconds and it is automatically deactivated. RF RANGE TEST is deactivated by touching BIND button during RF RANGE TEST mode.
PAGE 9
4. TRIM The trims are used to fine-tune the point where the servo returns to center. (Adjustable from -37.5% to +37.5%) ST: Use the ST-TRIM so your vehicle will go perfectly straight when the steering wheel is centered. (Adjustable from -37.5% to +37.5%) TH: Use the THR-TRIM to adjust the amount of brake that occurs when your engine’s idle is too low or high and your ESC is not perfectly at neutral. (Adjustable from -37.5% to +37.
PAGE 10
(Control Switch) BIND Button Electric model’s Fail safe position (Neutral) Engine model’s Fail safe position (Brake): Trigger and Steering Calibration While pressing BIND button, turn your transmitter on. Press BIND button for 5 sec until your transmitter beeps twice and it is returned to Calibration Model. Move steering and throttle to back and forward, left and right, then move to neutral position again. Now your transmitter beeps twice, indicating Calibration Setup is now set.
PAGE 11
Neutral Full left Full right Neutral Neutral Full Forward Full reverse(brake) Neutral LED and Buzzer indication RX BIND ON RX BIND OFF Range TEST Fail Safe Setup/Cancel Free Warning Status Tx Receive Rate Low Sensor Warning Rx Ex Temp High Rx Ex Volt Low Rx Voltage Low Tx Low Battery Bind Switch Push Push (Bind on status) Push 3sec (Bind on status) RED - GREEN ON Slow flash Buzzer - - Slow flash Low 2Time(90sec) - - 1cycle 2cycle 3cy
PAGE 12
CH1 CONNECTOR 1) Port 1, 2 should be connected with the servo or ESC. 2) Port 3 supports low voltage warning alarm with beep and LED indicator. In addition, it is available to use with telemetry sensor. When using receiver battery (Nixx 4~5 cell, LiPo 2 cell), it needs to be connected to Port3. As for low voltage warning alarm, the default value is 3.7V.
PAGE 13
PAGE 14
Smart Box (Configuration by Telemetry) The use of optional smart box supports easy configuration. When operating in SETTING & DATA VIEW mode in telemetry box, the screen appears as follows. RECEIVER 0.01 > >AL RX-V(5.1V) : 3.7V AL RX-T(+33`c): 65`C PERIOD : 10ms AL EX-V( 7.4V): AUTO AL EX-T( 27`C):100`C Smart Box (#33700) 1. ALARM VOLT It is used for low battery warning program. (Adjustable from 3.5V to 8.0V) The default value is 3.7V. 2.
PAGE 15
PAGE 16
PAGE 17