Tus neeg siv phau ntawv

This icon on product and packaging indicates that this product must not be
disposed of as part of domestic waste. In compliance with the Waste Electrical
and Electronic Equipment Directive (WEEE) this electrical device and potentially
included batteries must not be disposed of in conventional, domestic waste or
recycling waste. If you would like to dispose of this product and potentially
included batteries, please return it to the retailer or your local waste disposal
and recycling point.
Environment pollution, unsuitable for recycling
Scratches, discolouration, damage caused by moisture or
short circuit in the device
•Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product
Ohlstedter Strasse 17, 22949 Ammersbek / Germany
Made in China
© Copyright 2021 by CHAB GmbH. All Rights Reserved
G-M2HS02
Signal words and safety codes indicate the warning level and provide immediate information
in terms of the probability of occurrence as well as the type and severity of the consequences
if the measures to prevent hazards are not complied with.
Warns of a directly hazardous situation causing death or
serious injury.
Warns of a potentially hazardous situation that may
cause death or serious injury.
Warns of a potentially hazardous situation that may
cause minor injury.
Warns of a potential situation that may cause material or
environmental damage and disrupt operative processes.
5. Potential data loss
Data lost during commissioning
Potentially irreversible data loss
6. Cleaning the device
7. Cleaning the device
Harmful cleaning agents
Potential environmental pollution caused by components,
recycling circle interrupted
If you have any questions, please do not hesitate to contact our support at
[e-mail] or visit our website at www.graugear.de
1. Risk of electrical shock
Contact with parts conducting electricity
Risk of death by electrical shock
• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs
2. Hazards during assembly(if intended)
Sharp components
Potential injuries to fingers or hands during assembly(if intended)
• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
Safety information Safety information
Please read carefully the following information to prevent injuries, damage
to material and device as well as data loss:
Warning levels
3. Hazards caused by a developent of heat
• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit
Insufficient device / power unit ventilation
Overheating and failure of the device / power unit.
Risk of suffocation
Rish of death by suffocation or swallowing
• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children
4. Hazards caused by very small parts and packaging
COOLING KITS
for M.2 SSD 2280
www.graugear.de
8x Rubber Rim
Aluminum Heatsink
Manual Warranty card
Package Contents
4x Thermal PadCopper Heatsink
Designed for Desktop PC
Specially designed for desktop computers, this M.2 SSD heatsink compatible
with M.2 2280 SSD, perfectly fit for high performance M.2 SSD.
Double-sided cooling
Aluminum alloy-Groove design, greatly increase the heat dissipation area, with
10°C - 30°C cooling effect (Varies depending on the environments), cool your
M.2 SSD to a safe temp to avoid overheating and throttling, improving the
performance of your computer.
Unique Nano Thermal Pad
Advancing Gene thermal pad is made from Nano Silicon Grease Material,
with good thermal conductivity ability. Soft enough and good ductility,
compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage
to the SSD warranty label.
Fine Workmanship
Heatsink material: Aluminum alloy, anodic oxidation surface treatment.
Copper, passivated surface treatment
Aluminum Heatsink Dimensions: 70 x 22 x 10mm.
Aluminum Heatsink Net weight: 22g.
Copper Heatsink Dimensions: 70 x 20 x 3mm.
Copper Heatsink Net weight: 35g.
M.2 SSD Installation
Install thermal silicon, M.2 SSD,
and heatsink.
1
Put the aluminum alloy radiator
on two Rubber Rim
2
Aluminum Alloy Heatsink
Install thermal silicon, M.2 SSD,
and heatsink.
1
Put the aluminum alloy radiator
on two Rubber Rim
2
Copper Heatsink