User's Manual

31
/
107
3. Then, the message table shows “Pairing, please wait…” as shown below
4. After completing t he pairing, the message table shows “Succeeded to pair!” on the home page, as shown
below. Then, please un-plug the transmitters and use it for the mirroring on your laptop.
If error-message “Configuration fail” is shown, please check the connection of USB/type C to keep stable after
plug-in, and try again.
Note: After each changing the SSID/Wi-Fi channel in menu, all the transmitters must be paired again!
When you buy additional transmitters or when a transmitter should be assigned to another Base-unit, the
transmitter must be paired a gain.
A transmitter can only be paired to one Base-unit at a time. The transmitter will always make connection to the
Base-unit it was last paired to.
5.3 Mirroring
5.3.1 PC/Lap-top
Driver-based Transmitter
WMT2-C:
1. Use a universal USB stick to create a “Launcher”, which is stored in the base unit.
2. Connecting the USB stick to base unit and click the DOWNLOAD icon on the homepage to downlo a d
“WirelessMedia-windows.exe” for windows PC/Lap-top, “WirelessMedia-macOS.app” for Macbook, “user