User's Manual

50 / 107
6.1.1.2 Wireless Direct Mode
After Factory Reset, WMS base unit starts up in the default Stand-Alone “Wireless direct mode” configuration,
where the Base-unit creates its own wireless access point, which all transmitters use to connect. This is typical for
a quick setup for small group meetings. The Wi-Fi icon for the “Wireless direct mode” is displayed in top
status-bar of Home screen. Guest connect to the access-point of WMS, while Staff can also connect to Base-unit
via Wi-Fi or via LAN connection to their corporate network.
Stand-Alone Connection
The internal Wi-Fi access Point of WMS is active . The dongle is paired directly to it. Guest and Staff use the
internal Wi-Fi access point of Base-unit to present with all their units. No Internet access is required.
The LAN-Port of Base-unit is not connected. The PC-users can present with or without dongle by WirelessMedia
PC driver (Windows or MacOS). Android users (BYOD) can share their content by installing the free APP on their
device and IOS users can use AirPlay (Apple only).
Recommended Environment
This option is best for temporary operation, small installations, and rooms without network access or networks
that do not allow network access for Guests, due to strict security concerns, and are completely separate from
the corporate network.
Under this mode, dongle will be automatically paired to the base unit Wi-Fi hotspot when plugging dongle to
the base unit USB port for pairing.
You can start using WMS in this mode without any other wireless network configuration.