User's Manual

22 / 107
4.3 Power Connection
The Base unit can be powered by the external universal power adapter.
How to connect the external power adapter
1. Plug the power connector to the power adapter to the power input connector of the Base Unit
2. Choose the appropriate power plug (US, UK, EU or AU) to be installed on the power adapter,
3. Connect the power cable plug into the wall outlet.
Note: Once the base unit is powered, it starts up. From now on please use the POWER button with Status LED on
front of Base-unit to switch ON or OFF.
Power over Ethernet
If the LAN Ethernet switcher support POE (Power over Ethernet), it could power up the Base-unit instead of using
the external power adapter. (WMS-40 LAN2 Port is support POE.)
4.4 Video Connection
1. Connect the HDMI Output of base unit to a 4K or Full-HD display by a HDMI cable.
2. Connect the power adapter to the base unit DC power socket and connect the other side plug to an
available electrical outlet and switch the base unit on.
3. After started, the system show the home page, as shown below.