User's Manual

25
/
107
Sound is not sent out
WirelessMedia button will keep capturing and send the audio of PC/Lap-top, since PC/Lap is successfully
mirroring desktop to the main screen.
1. Please be sure the button is static green and the PC/Lap-top is sharing on the screen
2. Check Setting configuration, to adjust the Volume set in WirelessMedia setting tab.
PC/Lap Sound
As default set, WirelessMedia will mute the internal speaker of PC/Lap and route the audio to the base unit, after
PC/Lap is successfully mirroring desktop to the main screen, in order to avoid the repeated audio.
When click the button to stop sharing, local loudspeaker will return to previous status, you could adjust the
volume on your PC/Lap.
Note: If you want to keep the internal speaker of PC/Lap still while route the audio to the base unit, please click the
audio mute icon in the status bar to t urn on the internal speaker.
4.6 LAN connection
The Base Unit can be connected to a local network or directly to a PC/lap-top. For normal operation, a LAN
connection is not necessary. When needed, it’s suggested to connect the WMS to the Internet.