Wireless AV Content Sharing & BYOD collaboration System (Quad Viewer) User Manual_V1.
Feature List: WMS-40: Support quad viewer on one display. Support VESA PC resolution input, auto-detecting. Can transmit PC’s mirror/extended desktop or Macbook's mirror desktop. Can transmit smart devices' mirror, photos, videos, music etc. Support the Wireless Media Teleporter "show-me" button. Support USB/HDMI/USB Type C plug-in auto configuration/pairing for Wireless Media Teleporter "show-me" button. Support "Airplay" for apple device.
Catalogue 1. Overview:..........................................................................................................................................................6 2. Specification:................................................................................................................................................... 8 3. Panel Layout...................................................................................................................................................
6. Web Setting Management Configuration................................................................................................. 45 6.1 6.1.1 Network settings............................................................................................................................ 48 Wireless network............................................................................................................................48 6.1.2 Ethernet..........................................................
7.1 Check current firmware information..................................................................................................... 80 7.2 Upgrading firmware of base unit:......................................................................................................... 83 7.3 Upgrading and Pairing of Dongle:.............................................................................................. 84 7.4 Upgrading Launcher:................................................................
1. Overview: WirelessMedia Set WirelessMedia makes connecting or participate in a meeting by a most simple way, touching a button. It also allows the other to join in the meeting more actively. The result is to make the meeting more efficient and productive. A typical WirelessMedia contains one Base Unit WMS and two Transmitters e.g. WMT2-C/WMT1/WMT3-H/WMT3-HC/WMT-Mini for choices.
3 “WMedia2” App for Android For smart android devices to share the screen. 4 Airplay for IOS For smart IOS devices to share the screen. Accessories List ID Name Description 2 pcs of antenna are included in the box. To avoid 1 Antenna damage, they are not pre-mounted. The antenna can rotate for a better wireless connection. International plug inter-changeable power 2 Power adapter adapter, of which the plugs includes US, Europe, UK, Australia standard.
2. WMS-40 Specification HDMI output 1x HDMI 19-pin female connector Video Output Resolution 3840x2160@60Hz,3840x2160@30Hz, 1920x1080@60Hz Format Compliance HDMI1.4/HDMI2.0 Video Capacity: 1080P @ <60Hz Airplay for IOS devices 1080P @ <60Hz "WirelessMedia" app 1080P @ <60Hz for all show-me button HDCP HDCP1.4/HDCP2.2 Analog Audio Output 1x 3.5mm PC audio female connectors LAN port RJ45 x2：1000Mbps x1，100Mbps x1 USB interface USB3.0 x1, USB 2.
3. Panel Layout About this chapter The installation chapter gives an overview of the interface of WirelessMedia.
3.1 Hardware Interface 3.1.1 WMS-40 Front Panel ID Name Description USB port, for dongle pairing, mouse control, USB 1 Front USB connector 2 Front Type-C connector Type-C port, for dongle pairing. 3 Power Button Turn on or off the device. 4 Back-lit LED indicator touch screen etc. Initializing indicates RED, power on indicates flashing GREEN, “Ready to share” indicates static GREEN, “Sharing” indicates static cyan. USB port The USB port is used to update the software of the WMS-40.
The USB port is used for connecting a mouse to create/upgrade Launcher by clicking Download button, hide SSID, PASS, Wifi IP and Lan IP by clicking Info, check Security level button and control PC source device, when a PC desktop is mirroring to the screen by plugging in the dongle.
system. Rear USB3.0 USB port, for USB dongle pairing, mouse control, USB touch connector screen etc. 3 Reset Reset button to restore to the factory default setting. 4 HDMI output 5 RS-232 Connect an RS-232 cable from this port to an RS-232 device. LAN Ethernet 100Mbps, Connect an Ethernet cable between port 1 this jack and a LAN to connect WMS-40 to LAN. LAN Ethernet 1000Mbps, Connect an Ethernet cable between port 2 this jack and a LAN to connect WMS-40 to LAN. Support POE.
Default Configuration Ethernet: Proxy: None DHCP: Enable Wireless network: Frequency: 5GHZ Channel: Auto Auto change Wi-Fi hotspot password: 5minute Display & Audio HDMI resolution: Auto HDMI CEC: Device auto power off: ON Base unit auto power on: OFF Audio output: Jack&HDMI Airplay screen quality: High show device name and password when mirroring: OFF show PCs user name when mirroring: ON Moderator Control Add a sub-window bar to en
Auto create launcher: Disabled Clear history after meeting: Always 3.1.4 Dongle Front Panel WMT2-C, WMT-Mini, WMT3-H, WMT3-HC are dongles, which is used for toggling the mirroring from personal PC or MAC desktop on the main screen.
LED ring indicator behavior When LED indicator is static green, it’s ready to mirror your PC desktop on the main screen. When LED indicator is static red, 1) it’s mirroring your PC desktop on the screen, 2) pairing is done. You can now unplug the Button from the base unit.
4 ID 1 LED ring indicator Name HDMI Type C connector Indicates the status of the button. Description Using HDMI Type C connector of the button can be plugged into a PC/Laptop for sharing your screen. Touch the sensor button to start displaying the content of the 2 Touching Button PC/Lap-top’s screen on the main screen. Touch the button during the meeting will toggle the sharing of the screen. 3 LED ring indicator Indicates the status of the button.
ID Name 1 USB connector 2 Type C connector Description Using USB connector of the dongle can be plugged into a PC/Laptop for sharing your screen. Using Type C connector of the dongle can be plugged into a PC/Laptop for sharing your screen.
3.2 Software Interface 3.2.1 Home Screen ID Name Description Wi-Fi Direct mode: internal access point is enabled Wi-Fi Infrastructure mode: “Client-Mode“ , Wi-Fi connection to router is established, icon displays the current signal strength. 1 Wi-Fi Indicator A secure Wi-Fi connection is established, or connection to a router failed: Wi-Fi is not available: LAN Infrastructure mode: access point is disabled 2 ID Wi-Fi name or device name of the Base-unit access point.
3 PASS 4 Password-timer 5 6 7 Wi-Fi password of base unit. only displayed, when timer is active; time until the password is changed automatically. Refresh Generate new password manually for securing your Wi-Fi-password Wi-Fi network.
15 Load Scan QR-code for Android device and download the “WirelessMedia2” App from GooglePlay Store. App from Store 4. Installation The installation chapter gives an overview of the different ways to install and connect WirelessMedia Base Unit.
• 2 mounting screws • 2 plugs How to install 1. Drill two holes in the wall as indicated on the drawing. Horizontal distance: 177 mm ± 0.15 2. At the bottom of Base Unit, turn in 2 flat screws into 2 holes to be fasten enough. Note: Mounting screws and plugs are not included in the WirelessMedia box . The type of screws depends on the type of wall (stone, wood, plasterboard, ...) you are mounting the Base Unit to. Make sure the head of the screw is not larger than the hole in the bottom of base unit.
4.2 Wiring Diagram 4.3 Power Connection The Base unit can be powered by the external universal power adapter. How to connect the external power adapter 1. Plug the power connector to the power adapter to the power input connector of the Base Unit 2. Choose the appropriate power plug (US, UK, EU or AU) to be installed on the power adapter, 3. Connect the power cable plug into the wall outlet. Note: Once the base unit is powered, it starts up.
Power over Ethernet If the LAN Ethernet switcher support POE (Power over Ethernet), it could power up the Base-unit instead of using the external power adapter. (WMS-40 LAN2 Port is support POE.) 4.4 Video Connection 1. Connect the HDMI Output of base unit to a 4K or Full-HD display by a HDMI cable. 2. Connect the power adapter to the base unit DC power socket and connect the other side plug to an available electrical outlet and switch the base unit on. 3.
How to connect separate audio 1. Connect an audio cable with mini jack socket 3.5mm connector into the audio of the Base Unit 2. Connect the other side to the meeting room’s sound system.
Sound is not sent out WirelessMedia button will keep capturing and send the audio of PC/Lap-top, since PC/Lap is successfully mirroring desktop to the main screen. 1. Please be sure the button is static green and the PC/Lap-top is sharing on the screen 2. Check Setting configuration, to adjust the Volume set in WirelessMedia setting tab.
1. Connect a network cable with RJ-45 connector into the LAN port of Base Unit. 2. Connect the other side to LAN. 3. If the LAN Ethernet switcher support POE (Power over Ethernet), it could power up the WMS than using the external power adapter. The LAN connection can be used for: Network integration of Base Unit in guest or company network. Telnet control the Base Unit. Maintenance purpose. Over-The-Air -Update (OTA) of firmware of Base-unit.
4.7 Usage of USB device Please use a USB Mouse or Touchscreen: 1. To configure the Security level check button, DOWNLOAD BUTTON, INFO. 2. To control the sharing PC/Lap-top. 3. To activate system upgrading 4. For white board or annotation during a presentation, WirelessMedia transmits Video, Audio and the USB-HID function for mouse-control and click-function of a touchscreen. Connect touch-interface of your screen to the USB-port on your laptop or PC.
5. Quick-to-Start 5.1 Mobile device: Wireless Connection 1. Download the application namely “WirelessMedia” (for example scan QR-Code in Home screen) in Android Google Play market for Android mobile device. 2. For IOS devices, use Airplay to mirror the desktop. 3. WirelessMedia provides two way to discover the WMS for mobile devices. a) Portable hotspot, to connect the hotspot to connect the WMS. b) LAN connection, to connect the WMS and mobile both in LAN network, to discover and connect to WMS.
5.1.1 Enable portable hotspot: Check the SSID and PASS (Password) are shown on the Homepage, as shown below. 5.1.2 Enable LAN connection: Be sure the WMS is connected to the Network. When Local IP shows an active IP address, such like 192.168.3.32, it indicates WMS is successfully connected to the LAN and get an appointed IP address.
5.2 Pairing transmitter with base unit 1. Connect the USB of WMT2-C to either of the 2xUSB port of WMS, WMT-mini to USB port/type C port, WMT3-H (HDMI dongle )to USB port, WMT3-HC(Type C dongle) to type C port, to pair all the transmitters with base unit. The home page displays as shown below. 2.
3. Then, the message table shows “Pairing, please wait…” as shown below 4. After completing the pairing, the message table shows “Succeeded to pair!” on the home page, as shown below. Then, please un-plug the transmitters and use it for the mirroring on your laptop. If error-message “Configuration fail” is shown, please check the connection of USB/type C to keep stable after plug-in, and try again.
manual” and “WMedia2.apk”. Plug the USB stick to the USB port of your PC or lap-top to copy the relative “Launcher” as above to PC or lap-top. Continue with step 4. 3. Or connect PC to SSID & PASS of base unit which are shown on Homepage and browse the Wifi IP or Lan IP from PC, which are also shown on Homepage. Select to download the “WirelessMedia-windows.exe” for Windows PC/Lap-top or “WirelessMedia-macOS.app” for MACbook. Continue with step 4. 4. Execute WirelessMedia.exe/app from pc or lap-top.
WMT-mini: 1. Plug WMT-mini into USB/Type C port to pair with base unit. The “WirelessMedia-windows.exe” for windows PC/Lap-top, “WirelessMedia-macOS.app” for Macbook will be auto downloaded into WMT-mini. 2. Plug WMT-mini into PC/Laptop/MACbook and click the “Launcher” to run. WMT-mini will auto change PC’s wifi to the target base unit wifi. No need to manually change PC’s wifi. It will pop out the message bar to enter the password to connect.
3. It will show “Ready to share”, click to share the desktop to screen. Note: for second time user, WMT-mini will automatically run to share screen, no need to click “Launcher”.
Non-Driver based transmitter WMT3-H (HDMI dongle) /WMT3-HC (Type C dongle): 1. Plug USB port of WMT3-H/ Type C port of WMT3-HC to base unit to pair. 2. Plug USB port and HDMI port of WMT3-H /Type C port of WMT3-HC to PC/Laptop/MacBook. (USB port for power) 3. Till the transmitter LED turn static green and touch to share the screen or click the visual button on bottom right corner of PC.
5.3.2 Mobiles Devices Sharing on Android devices 1. Open the “WirelessMedia” application. 2. Connect your mobile device to one of the displayed Wi-Fi networks. 3. Open the “WirelessMedia2” application in your mobile device, and you will see the Home Page of “WirelessMedia2” as shown below. and click the device list refresh button for Android, which is highlighted in red circles as shown below: 4. Select the base unit you want to connect, enter password and mirror.
5. After completing the pairing, it shows OSD “Welcome ***” on the home page. For example, if we connect it by a HUAWEI-PLA-AL00, it shows a “Welcome HUAWEI-PLA-AL00” on screen, as shown below. 6. Now you can mirror your desktop of your mobile. 7. Click again the button “Share Screen” to stop mirroring. Click the connected device name to check the base unit status and base unit firmware version.
Click “Fullscreen” to be full screen in the main screen when more than one signal is connected and shared. Click the upper right corner icon, check the “WirelessMedia2” application version information. Sharing on IOS devices 1. With AirPlay technology, user can stream his screen or music, (YouTube-) videos, pictures … wireless to Base-unit. Connect your iOS device with the same Wi-Fi network from WMS. For IOS devices, activate the control center.
5.4 Preview Window At touch-screen or with mouse of Base-unit, you can click on LEFT or RIGHT-arrow (2), to show the small preview-windows as a bar on the right edge of the screen, or to hide them, if they are disturbing. Once the preview windows are activated, you see live-pictures (1) of all connected transmitters and android devices via “WirelessMedia2” APK at the right edge of the screen. Just scroll UP or DOWN (3) to see further preview pictures.
5.5 Whiteboard & Annotation Whiteboard and Annotation requires an HID compatible device, such as interactive white board or interactive touch screen. It is easy to use, makes collaboration in your business more productive and effective: documents can be easily written, edited, captured and shared. Whiteboard: write all your ideas and share the digital notes with anybody. Different colors of pen and background can be selected.
automatically. In order to let other attendees join into meetings as well. The toolbar for Whiteboard or Annotation appears in the bottom of your screen. If another user is mirroring, the Whiteboard & Annotation function is closed. 5.5.1 Whiteboard Click on the icon to enter the white Whiteboard page. You can create free drawings with your finger at touch screen, mouse (multitouch capability).
Use the toolbar to select one of the following functions.
Tool bar 4 Save the current screenshot on local storage (PNG+WMN) File options Close Whiteboard to go back to Home screen, actual project can be saved on local storage (WMN) File options: Open WMN-file from local storage and continue/edit an older project New project Save as WMN on local storage in unit, it will be erased after POWER-OFF Import from U disk stored project (WMN) All pages are saved as PDF on local storage Clear history – delete all whiteboard & annotation files on
Use the toolbar to select one of the following functions.
6. Web Setting Management Configuration Connect base unit ID & Password or LAN IP to laptop, to enter Wi-Fi IP browser page to configure settings of base unit. The “WirelessMedia-windows.exe” and “WirelessMedia-Pro.exe” for windows PC/Lap-top, “WirelessMedia-macOS.app” for Mac OS X, “user manual” and “WirelessMedia” for Android can be downloaded here.
Click “Console” on the top right corner to enter into menu to configure. A password is required to enter the configuration menu. The default password after Reset is ”admin”. You can change the password in menu “Security setting”. Note: If user has forgotten his password, you need to make a Factory Reset to restore “admin” as password.
The main interface of Setting is shown as below, including Network settings, Display & Audio, Moderator control, System settings, Security settings, Firmware upgrade, Other settings, About device.
6.1 Network settings 6.1.1 Wireless network To take the full benefits of the WirelessMedia possibilities, WMS should be properly integrated in the organization’s network (company/university/school). This wizard allows user to create a custom configuration for integration of WirelessMedia into the existing wireless infrastructure in larger organizations.
6.1.1.1 Wireless network configuration wizard Enter a device name for the Base-unit. We recommend to take a descriptive name, if you have more than one WirelessMedia installed. The default name is “WMS-XXXX”. Only "a-z","A-Z","0-9","-_" and space are legal character. Click “Next step”.
6.1.1.2 Wireless Direct Mode After Factory Reset, WMS base unit starts up in the default Stand-Alone “Wireless direct mode” configuration, where the Base-unit creates its own wireless access point, which all transmitters use to connect. This is typical for a quick setup for small group meetings. The Wi-Fi icon for the “Wireless direct mode” is displayed in top status-bar of Home screen.
Click “Next step” to Set up Wi-Fi access point Set-up Wi-Fi access point includes, Frequency, Channel, Password. Frequency: Click to select 2.4 GHz or 5 GHz Wi-Fi frequency. Default is 5 GHz. Channel: Click to select the Wi-Fi channel. Default is 5 GHz, Auto. If the Wi-Fi channel is changed, no new pairing of the dongle is necessary. 2.
6.1.1.3 Wireless Infrastructure mode WirelessMedia can connect to a wired and a wireless network simultaneously. The basic unit is firmly "connected to the company network with LAN. Guest users connect to Wi-Fi "Guest" access. The employees (“Staff”) connect to their usual access point of the corporate network, without having to change the Wi-Fi. This is very useful for organizations, which have a wireless “Guest” network for external visitors and a wired “Staff” network for their employees.
The dongle is connected to the Wi-Fi access Point of Guest network, which in turn is connected to the internal Wi-Fi access Point of WirelessMedia. (The dongle can also be configured to connect to the enterprise’s access point.) Mobile users stay connected to their current network, have access to their normal corporate environment, as well as Internet access. The actual received signal strength from Guest network is shown in Home screen of WirelessMedia: .
Wi-Fi name of guest and staff will be shown on home screen after “Submit settings”. After submitting successfully, please re-pair dongle with base unit. “Dongle connects to base unit via LAN.” Choose a LAN network which is used for the company staff users. Note: usually in this mode, dongle paired for internal staff usage. Select SSID: Choose a wireless network to connect to base unit for guest. Password: enter password to connect the base unit to the guest network.
Click “Next step” to edit or change Guest network SSID and Staff network SSID. Wifi name of guest and staff will be shown on home screen after “Submit settings” After submitting successfully, please re-pair dongle with base unit.
6.1.1.4 LAN Infrastructure Mode In this configuration the built-in Wi-Fi access point of WirelessMedia is disabled: . The dongle and/or the mobile devices can connect to the secured wireless access point of the company network. The Base-unit of WirelessMedia is hard-wired connected via LAN to the Ethernet of the Company network. The Staff-users connect to their usual access point of Company network, without the need to change the Wi-Fi.
Click “Next step” to choose a LAN network which is used for the company staff users and pair the dongle into this network. Click “Next step” to edit or change Guest network SSID and Staff network SSID. Wifi name of guest and staff will be shown on home screen after “Submit settings” After submitting successfully, please re-pair dongle with base unit.
6.1.2 Ethernet Configure the Ethernet settings. WMS-40 has 2 Lan port, if the base unit is connected with 2 LAN cable, you can configure from below tab. 6.1.3 Auto change password The password remains unchanged for all participants of the meeting, while at least one dongle or a Wi-Fi network of a mobile device are connected with Base-unit. After the user is disconnected, a configurable time runs.
The changeable password will be fixed by connecting a dongle to PC/Laptop or connect a mobile unit to the Wi-Fi of the Base-unit, and continue to be changeable after 15s after disconnecting the last dongle or disconnect the Wi-Fi of a mobile unit. User do not need to re-pair the dongle again, if only the password is changed. A Smart mobile device has to enter the correct SSID and password to connect to the Base-unit access point, in order to access all functionality.
Select the resolution at HDMI output of Base-unit. Existing HDMI output resolution as below: Auto 3840x2160 @30Hz 3840x2160 @60Hz 3840x2160 @50Hz 1920x1080 @60Hz 1920x1080 @50Hz 1920x1080 @30Hz Note: if the display is only support FULL HD, the 4K resolution will not be shown on the list of the below resolution.
HDMI CEC Base unit support CEC function if the connected display support CEC function. Device auto power off: ON (Default): Display will automatically turn off when base unit is powered off. OFF: Display will not automatically turn off when base unit is powered off. Base unit auto power on: On: Base unit will be automatically woke up when display is on. Off (Default): Base unit will not be automatically woke up when display is on.
6.2.2 Audio Audio Choose audio output: Jack: output only 3.5mm mini-jack audio. HDMI: output only HDMI audio. Jack&HDMI (Default): output Jack & HDMI audio Volume User can select volume of display from 0 to 100.
6.2.3 Airplay screen quality Click to select the image quality when transmit apple device by “AirPlay” mode.
6.2.4 Screen display ID Show device name and password when mirroring: Name (ID) and Wi-Fi-password can be shown or hided at top status-line of main screen. Show PCs user name when mirroring. Show user name. 6.2.5 Home Screen background image When powering WirelessMedia the start screen will be displayed. User can change background image of Home screen. Select the image (jpg, bmp, png, gif with resolution 1920x1080 p.) from suitable directory and activate box for selection.
6.3 Moderator control Add a sub-window bar to enable previewing the connected devices. Tick the icon, it will show the sub window as below once devices are connected to base unit.
If do not tick the icon, the preview window bar will be minimized as below. Real time preview If tick the icon, the preview window will show real time preview, if not tick, the preview window will only show a static picture as below.
6.4 System settings 6.4.1 Buttons: Show Device name, MAC Address, Serial Number, Device Version, Device Status, Last Action, Item Operate. Paired: Show properties of connected dongles and can be managed from this page.
6.4.2 Date & Time Includes Automatic date & time, Set date, Set time, Select time zone. Automatic date & time: Check to use a NTP time server to provide time as system time. Set date: Click in the input filed to fill out the appropriate date. Set time: Click in the input filed to fill out the appropriate time manually. The setting is not saved, when power is off. Select time zone: Click in the input filed to fill out the appropriate time zone.
/ 107
6.4.3 Auto standby If the Auto Standby mode is activated, WirelessMedia will automatically switch to power saving mode, a selectable time after the last dongle was plugged out, or Wi-Fi of a mobile unit was disconnected, or there is no operation at the system. Time is selectable from Never to 30 minutes. In Standby green LED in top of Base-unit is flashing and HDMI-output is switched off. When a dongle is plugged in and connected, or a mobile unit is connected, Standby is deactivated.
6.4.4 Language Select an installed display language.
6.4.5 Reset Doing factory reset to restore unit.
6.4.6 Configuration File Configuration File is a packaged file which contains all the configuration parameter of the WMS, which could be downloaded and copied to multiple device which needs to use the same configuration. 6.4.7 Series Port Setting To configure telnet command and RS-232 command.
/ 107
6.5 Security Settings 6.5.1 Security level Based on user requirements, three different security levels can be set in the menu of WirelessMedia, to satisfy different security requirements, according to different security sensitive environments or security policies. A security level is a predefined set of settings. Click on the corresponding entry in the menu if you want to adjust the respective security features. The default setting is level 1.
6.5.2 Login Password Change admin password for entering setting menu on webserver. Default password, or after a RESET, is “admin”. You can change the password as you like. You can also deactivate the password entry, set the appropriate checkmark and “Confirm settings”. 6.5.3 Connection password Two type of password format can be chosen to show on home screen.
6.6 Firmware upgrade 6.6.1 Firmware Update To upload local updating files to upgrade base unit. 6.6.2 Automatic Upgrading Tick to choose upgrading from OTA via Internet or from local files.
6.7 Other settings 6.7.1 Auto create launcher Determines, when using a USB memory at one USB-port of Base-unit, the Launcher program “WirelessMedia” will be copied automatically on USB memory. Enable or disable the corresponding box. 6.7.2 Clear history after meeting Pictures, videos, music of mobile units will be stored in memory of Base-unit. This memory can optionally be erased, at the end of a meeting, when the dongle is pulled from the Laptop / PC.
6.8 About device Check the firmware version of base unit and web server version. 7. Updating WirelessMedia An update of the firmware can be useful to take the advantage of new features of WirelessMedia or to fix known issues and bugs. WirelessMedia includes two methods of updating. Updating by USB stick and webserver. After updating the Base-unit, always check, whether the other parts still fit together or should be updated also.
There are up to three different areas for updating: Firmware Base-unit, Firmware dongle and Launcher for PC/Laptop or MAC “WirelessMedia.exe“. All software is stored in Base-unit, to be transferred manually to different devices. 7.1 Check current firmware information Base-unit: webserver “console” menu / About device. Windows OS: Dongle/Launcher: firmware version can be visual in the ““WirelessMedia”.
MAC OSX: Dongle/Launcher: firmware version can be visual in the ““WirelessMedia”.app” program icon in MAC OSX status bar, by clicking the ““WirelessMedia”” icon and select “About”, as shown below. Click “About” to check dongle and launcher program.
When mismatching occurs, please do the following steps to update the firmwares, as indicates in the message box.
7.2 Upgrading firmware of base unit: There are two ways to upgrade base unit as below. First method to upgrade base unit as below: The base unit device can be updated through a USB drive as below. 1. Copy the updating file “update.img” to the root directory of the USB drive. 2. Connect the USB drive to either USB port of Base-unit. Note: The USB port can only support maximum 500ma. Please use a small power U-disk as upgrading USB drive. WirelessMedia recognizes the “update.
The display device shows the Home Screen after normal boot of the device, you can disconnect USB-drive. 4. Perform “Factory Reset” when the firmware update is complete? Only when the associated “Release notes” are requiring an additional „Factory Reset“, perform it via the menu “System settings” / “Reset” on websever console menu. All data of configuration will be lost.
2. “Pairing” to the Base-unit is done automatically afterwards, it shows as below 3. Plug out the dongle. Now, the upgrading progress is finished. Update all other dongles accordingly. 7.4 Upgrading Launcher: Attention: The USB driver should be FAT 32 format not NTSC format. After upgrading Base unit and Dongle, the launcher should be written with the actual launcher program for Windows, MAC and Apps for mobile-units.
Method 2: Via WIFI 1. Connect PC to WMS’s SSID and enter password in homepage, see pictures as below: 2. Open Browser and enter WiFi IP: 192.168.43.1:8000. 3. Click to enter “Launcher” download webpage. Shown as below: 4. Choose and click Windows or MAC launcher to download. 5. Find the “Launcher” program in PC and copy to PC desktop. (Recommend to copy to desktop for quick run.) 6. Run the program to start sharing.
The Launcher program "WirelessMedia for Windows" and "WirelessMedia Pro for Windows" includes by default an additional virtual driver "ExtendedDesktop" to optionally install the Windows 10 Extended Desktop functionality, if they are is needed. This may require admin rights. 7.5 Clean left files of older versions of Launcher program in Lap-top There are some old version “WirelessMedia” files left in the lap-top, which may influence the performance of the newer “WirelessMedia” program.
3. Right-Click on the “*.service” or “*.serviceC3”, for example right-click on “WirelessMediaAutoServiceC3.exe”as shown below, and click to End Process Tree. 4. Check again the task manager, to be sure there is no more any “WirelessMedia” programs still running in the task manager. And check again to be sure there is no more any “WirelessMedia” in the C:\Users\***(userame)\AppData\Local\”WirelessMedia”. 5. Execute the actual version of Launcher program. Upgrading progress is completed. 8. 8.
Launcher program. When the Launcher program is pre-installed one time and already run in the first time, with plug in dongle, continue with step 2. When Launcher program is not yet installed on PC, refer to chapter 7.4. 1. Plug a dongle to the USB port of your PC or Laptop. The WirelessMedia application is starting automatically and a symbol is displayed in the task bar of the PC/laptop 2. .
8.1.3 Microsoft Windows PC/Laptop without Dongle For first time user, you have to copy the Launcher program ”WirelessMedia for Windows” first on your Laptop. When the Launcher program is already loaded, continue with Step 2. 1. When Launcher program is not yet installed on PC, refer to chapter 7.4. 2. Connect your laptop to Wi-Fi network displayed on the Home screen (“Guest’, “Staff”), or connect to the LAN on the network using a network cable. 3. Double-click the "WirelessMedia-windows.
5. Click “Ready to share” in PC, when window color is static red, the screen is mirroring to the main screen. 6. Click the visual button again, to stop mirroring, window color shows green again. You can minimize the APP-window, in Windows taskbar you can see if screen is mirroring Right click the WirelessMedia status icon or not . in Windows taskbar to open up the context- menu. “About”: You can check the software versions of the Base-unit, the dongle and the launcher program.
“Exit”: End APP. Exiting the App completely. If you click the “close” in the upper right corner of the app, the app in the task bar is only minimized and can be recalled again from the taskbar at any time. 8.1.4 Options for Microsoft Windows PC / Laptop – Extended Screen Click the icon in App to open/close “options”.
“Options”: Extended Screen: Transfers extended desktop of active source. (depending on your operating system, may require the installation of the virtual driver “ExtendedDisplay“ for function with Windows 10). The primary screen (1) is displayed on the laptop and the virtually extended screen (2) is displayed on the main screen. If the PC has already connected an extended screen (3), the extended screen (2) will always be displayed on the main screen.
Keep Aspect Ratio: Keep the original aspect ratio to display on the main screen. Stream Mode: Fluency Priority: Default Quality Priority: Better quality on video and audio. Low Latency Mouse: The setting is applied individually for this laptop only. The shape of mouse-pointer is equal the shape in application. There may be a small delay in movement of the cursor (approx. 150 ms).
When the Launcher program ”WirelessMedia for MAC” is already loaded, continue with Step 2. 1. When Launcher program is not yet installed on PC, refer to chapter 7.4. 2. Connect your laptop to Wi-Fi network displayed on the Home screen (“Guest’, “Staff”), or connect to the LAN on the network using a network cable. 3. Plug a dongle to the USB port of your Macbook. The WirelessMedia application is starting automatically and a symbol 4. is displayed in the dock and in top menu-bar.
8.1.6 MAC OS PC/Laptop without Dongle For first time user, you have to copy the Launcher program ”WirelessMedia for Mac” first on your Mac. When the Launcher program is already loaded, continue with Step 2. 1. When Launcher program “WirelessMedia-macOS.app” is not yet installed on PC, refer to chapter 7.4. 2. Connect your Mac to Wi-Fi network displayed on the Home screen (“Guest’, “Staff”), or connect to the LAN on the network using a network cable. 3.
6. Click the visual button again, to stop mirroring, window color shows green again. You can minimize the APP-window, in top menu-bar you can see if screen is mirroring Right click the WirelessMedia status icon or not . in top menu-bar to open up the context- menu. “About”: You can check the software versions of the Base-unit, the dongle and the launcher program. “Exit”: End APP. Exiting the App completely.
8.1.7 Options for Apple MacOS, MacBook – Extended Screen Click the icon in App to open/close “options”. “Options”: Extended Screen: Transmits the Extended desktop (“Use a Separate Display”) only via AirPlay, when activated for Display on WirelessMedia. Keep Aspect Ratio: Keep the original aspect ratio to display on the main screen. Lowest Latency (Mouse): The setting is applied individually for this laptop only. The shape of mouse-pointer is equal the shape in application.
8.2 Transmitting IOS mobile device 8.2.1 How to use AirPlay? AirPlay: WirelessMedia Base Unit supports “Airplay”, which enable mirroring the desktop of your Apple device such as iPhone, iPad etc. on the main screen. (Note: iOS devices must first be connected to the Wi-Fi of “WirelessMedia”). Please open the control center on the desktop with the appropriate gesture. Click the airplay icon on your Apply device and select the receiver device WMS to connect.
4. Select the base unit you want to connect, enter password and mirror.
5. When sharing to main screen, it shows OSD “Welcome ***” on the home page. For example, if we connect it by a HUAWEI-PLA-AL00, it shows a “Welcome HUAWEI-PLA-AL00” on screen, as shown below. 6. Now you can mirror your desktop of your mobile. 7. Click again the button “Share Screen” to stop mirroring. You could click “my device” to check the device status and firmware verssion. 9. WIFI Recommendation Setting 9.
9.2 Check the WIFI RSSI on dongle or Mobiles Please use a WIFI analysis software to place it at the same place as the dongle or mobiles, to measure the WIFI RSSI (Received Signal Strength Indicator). We recommend the RSSI shall be above -70dB to be good enough to keep a stable signal transmission. If not, please try to take the following measures, as in the problem shooting---Bad wireless connection congestion. 10.
cause reflections deteriorating antennas at the rear panel of the wireless signal. base unit to the transmitter direction. Obstacles between dongles Remove or limit as much as and Base unit cause lowering possible all obstructions of the wireless strength and between the transmitters and quality. base unit. Avoid to place the Base-unit in (metal) cabinets, suspended ceilings, under tables or in adjoining rooms.
HD video requires a certain amount of CPU power to End low power mode at laptop. guarantee the optimum quality of the transmission. Video is not shown on screen The content use HDCP WirelessMedia input can’t support showing HDCP source. If possible, connect the source device to local HDMI input at base unit. The display cable (HDMI) is not correctly connected. Insert the display cable to the display and the Base-unit. The displays is switched off. Switch on the display.
to Base Unit including Dolby MS11, DDCO audio format, like DD, DD+, DTSLBR, DTSE, DTSNeoUltra, HE-AAC, DTS DMP, WMA, DRA, SRS-THEATERSOUND, COOK DTS_StudioSound3D, DTS_HD, There is no sound at main-display. No connected audio device. Make sure, the audio is turned on. Volume is set to OFF. Adjust level in menu configuration WirelessMedia console in on webserver settings.
when mirroring a video by the App system, Android doesn’t provide an “WirelessMedia for Android“. interface to capture the audio. In mirroring when necessary. this case, there is no sound when mirroring the video. Can’t update firmware of the base Flash disk format is NTFS unit. Please re-format the flash disk to be FAT format to update it. To use AirPlay, you must Can’t work airplay with Operation System Requirement Macbook/Iphone/iPad. Mac OS 10.9 connect the iOS device to the IOS 8.
Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Information: Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
