User's Manual

21 / 110
18
Wi-Fi IP
LAN IP
 Wi-Fi IP: address of base unit in wireless LAN
 Assigned IP: address of base unit in LAN; “N/A“ =
no connection to network
4. Installation
The installation chapter gives an overview of the different ways to install and connect WirelessMedia Base Unit.
Overview:
 Installation methods for the Base unit
 Table mounting
 Wall mounting
 Recommendations about antenna placement and orientation
 WU-10 Power Connection
 WU-10 Video Connection
 WU-10 Audio connection
 WU-10 LAN connection
 About USB device connection
 Wiring Diagram
4.1 Installation methods for the Base unit
Introduction to the installation methods:
The Base unit can be installed in different ways in a meeting room.
 Table mount
 Wall mount
The articulated antennas are removable. They can rotate for better wireless connection.
Attention: For optimal performance, install the Base unit close to the display and avoid obstacles between the
Base unit and the Transmitters.
Necessary tools
• A drill (type of drill depends on the type of wall)
• The mounting screws (mounting screws not included in the package)
Necessary parts
• 2 mounting screws (Screw head diameter of screws shall be within 6-8mm)