Operation Manual

Safety precautions

· The connection and installation of electrical devices may only be carried out by a qualified

electrician.

· Interventions in and changes to the device result in the voiding of the warranty claim.

· Observe your national regulations and the respective safety provisions.

· Switch-off commands have priority over switch-on commands.

125

147

Assembly

The time switch has the classical 3-point fasten-

ing facility.

a) On the counter field

b) On the terminal cover in accordance with

DIN 43857 Part 5

Connection

See unit sticker / circuit diagram

12 34 5 67 8

After connecting correctly, attach the terminal

cover  and tighten the sealing screw . After

setting and programming the switching times,

attach the transparent cover on the upper edge

of the housing, tilt it downwards and secure with

the sealing screw . Both housing sections

can be fitted, sealed and opened independently

of each other.

If necessary, break off

the securing bracket

and push in on the

upper edge of the

housing





