Operation Manual

94
6. Switching commands
In the weekly and annual program, there are three or four switching commands available for selection:
ON/OFF
The ON/OFF command switches the time switch ON for an adjustable period.
• ON switches the channel on.
• OFF switches the channel off.
The status of the consumer is maintained until the next ON or OFF switching command is carried out.
Pulse
The Pulse switching command switches the channel ON for a short period.
A pulse switching command consists of:
• Start time
• Pulse duration = ON switching time
Cycle
TheCycleswitchingcommandswitchesthechannelONandOFFoveraspeciedperiod.
A cycle switching command consists of:
• Start time
• Pulse duration = ON switching time
• Period = ON switching time + pause
• Cycletime 
= Period between channel ON and channel OFF
• End time
The cycle time must not be less than the period.
No nesting of cycle programs is allowed.
OFF
The OFF command switches the time switch OFF for an adjustable period.
• OFF switches the channel off for the selected period.
15.00 h
Pulse
duration
Start time
19.00 h9.00 h
Pulse
duration
Pause
Duration of the cycle
ChannelON
ChannelOFF
Period
Start time