Operation Manual

88
4.6.3 Annual program
A Program number of the switching commands
B Typeofswitchingcommand(ON/OFF,Pulse,Cycle))
C Start time of the switching command
C End time of the switching command
E Pulse duration
The pulse duration shows the ON switching time of a
switching command in case of a pulse or cycle program.
F Period
The period shows the duration of a cycle.
F Weekdays
You can select the weekday on which the respective timer
programistobestartedornished.Tickthe"Daily"boxif
the switching command should be carried out every day.
G Only this year
You can select whether the switching command is to apply
only to the selected year or to be carried out every year.
Activate Only this year if the switching command should
only be applicable for the selected year.
Abb. 16: Tabular representation – Annual program
A B C D E GF H