Operation Manual

86
4.6 Tabular representation
For all weekly, holiday, annual and astro programs, all the information of a
timer program is shown in the table. Each switching command
(e.g.ONorOFF)isshowninatablecolumn.
4.6.1 Weekly program
A Program number of the switching commands
B Typeofswitchingcommand(ON,OFF,Pulse,CycleONorCycleOFF)
C Time
Start or End Time of the switching command
D Pulse duration
The pulse duration shows the ON switching time of a switching
command in case of a pulse or cycle program.
E Period
The period shows the duration of a cycle.
F Weekday
You can select the weekday on which the respective timer program
istobestartedornished.Tickthe"Daily"boxiftheswitching
command should be carried out every day.
If you click with the left mouse button on a switching command in the table,
this command is highlighted.
If you click with the right mouse button, a menu opens. Select Delete to
delete the timer program.
To change the time, pulse duration or period of a switching command, click
on the desired switching command in the table with the left mouse button.
The "up" and "down" arrow keys canbeusedtosetdays(dd),hours
(hh),minutes(mm)andseconds(ss).
Abb. 14: Tabularrepresentation–Weeklyprogram
A B C D E F