Operation Manual

78
1. Start the program by double clicking on the symbol of the respective
programgroup.(Thenamewasspeciedbyyou)
Z
The start screen of the program is displayed.
2. Select the desired language in the Select a Language box.
Z
Clickon to create an individual timer program.
Z
Clickon to open an already stored timer program.
Z
Clickon to transmit a timer program from the handheld
programmingdevicetothePC.
Z
Clickon to transmit a timer program from the timer to the
PCviaaLANmodule.
Z
Clickon to exit the programming software.
3.1 Creatinganewtimerprogram
3. Clickon to create an individual timer program.
Z
The page "Select a Timer" is displayed.
4. You can enter a project name for the individual timer program, and for the
program creator.
Z
This information is shown on printouts of the timer program.
5. Clickonthebox Timer Model to select the timer model for which the timer
program is to be created.
Z
The Channels box shows automatically the number of channels of the
timer.
6. Depending on the timer model, you can set the number of extensions in the
Extensions box.
7. Clickon
toconrmyourinputs.
Z
Depending on the timer model, the "Main Window", the page "Select
Location" or the page "Timer Settings" is displayed.
3. Starting the program
2.
Abb. 2: New timer program – Start screen
Abb. 3: New timer program – Timer Selection
5.
4.
6.