Operation Manual

141
EN
In the Transmit box, the following settings can be made:
4. Activate the Timer Programs box, to load the created timer programs to the
handheld programming device. You can select the respective memory space
to which the timer program/data is to be transmitted by entering it in the
Program place box
If the selected memory space in the handheld programming device is
occupied, it will be overwritten!
5. Select the Serial Port to which the handheld programming device is
connected.
• If you deactivate timer programs, only the system time and, depending on
the setting, Summer / Winter Time are transmitted.
• Deactivate Summer/Winter Time if you do not want a changeover.
6. Clickon to transmit your settings to the handheld programming
device.
Z
The progress bar will be shown.
Z
A message will appear on the monitor as soon as the transmission was
successful/unsuccessful.
!