Operation Manual

140
13.3 Sendingdata(PC

Handheldprogrammingdevice)
The handheld programming device has four storage possibilities:
P 1 = 100 memory spaces
P 2 = 300 memory spaces
P 3 = 300 memory spaces
P 4 = 800 memory spaces
Display on the handheld programming device:
– Program places empty = P 1, P 2, P 3, P 4
– Program places occupied = P _ 1, P _ 2, P _ 3, P _ 4
You can decide which contents of the timer program are to be transmitted:
– System Time
– Summer/Winter Time
– Timer programs
1. In the menu bar, select File

Send To

Handheld programming device
Z
This will open the window "Transmitting timer programs".
2. In the Reference Time box, select the date and time to be transmitted.
• Activate the System TimeboxtotransmitthecurrentPCdatetothe
timer.
• Activate the Manual box if you want to enter the date and time
individually.
3. The Summer/Winter Time box can be used to set the changeover from
summertime to wintertime and vice versa.
• Activate Auto if the changeover should be carried out according to
thedatapredenedbylaw(CET).Itwillberecalculatedeveryyear.
No change is possible.
• Activate the Manual box if you want to enter the applicable data for
your location/country manually.
• Activate None if you do not want to make a changeover.
Abb. 76:
Transmitting timer programs - Handheld programming device 2
2.
3.
4.
5.
6.