Manualshelf

Operation Manual

ManualsBrandsGrasslin ManualsMiscellaneousTalento Dialog
131132133134135136137138139140
138
13. Transmitting timer programs via the handheld programming device
The handheld programming device can be used to transmit the timer programs
createdbymeansofthePCtotherespectivetimerandviceversa.
You can transmit the respective timer program exclusively to the
timer(model)forwhichthetimerprogramwascreated.
13.1 Transmission principle
ThedataistransmittedfromthePCtothehandheldprogrammingdeviceand
vice versa via the serial interface to which the handheld programming device is
connected(COMX).
The data is transmitted from the handheld programming device to the respective
timer via an infrared interface or downloaded from the timer by the handheld
programming device.
The same method is used to transmit the timer programs from timer to timer.
Handheld programming device
PCinterface
IR interface
MENU
1
15
:
26
1 6 12 18 24
2
1 OFF
ON 2
MENU
FIX
1 OFF
ON 2
OVR
1
C1
15:26
Res.
1 6 12 18 24
2
Attheendofthischapter,youwillndsomeinformationfromtheoperating
manual of the handheld programming device.
For further information, see the separate operating manual "Handheld
programming device".