Operation Manual

133
EN
3. Enter the name for your workgroup, e.g. LAN modules in building A.
4. IftheLANmoduleandthePCarelocatedinthesamelocalnetwork,activate
the LAN network box.
Then click on to search already existing LAN modules in the
network.(Seepage134.)
or
Deactivate the LAN network box, if you use the LAN module via
the Internet.
IPaddress,TCPportandHTTPportareprovidedbytheDynamicDNSserver.
Z
All parameters can also be entered in the table manually:
– Name of the installation, e.g. LAN module 1
–SerialnumberandMACaddressoftheLANmodule
–IPaddress(onlyactiveifyouhaveactivatedLAN network)
–TCPport(onlyactiveifyouhaveactivatedLAN network)
–HTTPport(onlyactiveifyouhaveactivatedLAN network)
Thecolumn"Internetaccess"islledinautomatically.
Double click with the left mouse button on web to open the start screen of
the administration zone of the LAN module.
Z
Clickon to save your settings.
Z
Clickon to leave the screen without saving the settings.
Z
Clickon toconguretheInternetaccess.(Seepage135.)
4.
3.
Abb. 67: Transmitting timer programs – LAN module settings 2