Operation Manual

118
Starting the program
1. Starttheprogramandselectyourtimer(seechapter3).
Z
The main menu opens.
2. In the register, click on the button Annual Programs.
3. Select in the register the channel for which the annual program should be
created,e.g.CH1=channel1.
Itispossibletospecifychannelsbydouble-clickingontheChannelstab.
A
Cycleprogramming
4. Select the switching command .
5. Clickwiththeleftmousebuttoninthelineforthechannel1(CH1)ontheeld
09:00a.m.tosettheONswitchingcommandandthenintheeld07:00p.m.
to set the OFF switching command.
Z
Thewindow"Pulse/CycleSettings"opens.
6. Set the days, hours, minutes or seconds for the pulse duration.
7. Setthedays,hours,minutesorsecondsfortheperiodandconrmyourinput
by clicking on OK.
Z
The calendar opens.
10.3 Annualprogram–Cycle
Abb. 47: Annualprogram-Cycle
Example
Channel1isswitchedONfromJanuary15toApril15everyhourfor10
minutes.
Start time Monday January 15, 9.00 a.m.
Duration 10 min.
Period 1 hour
End time Friday April 15, 07.00 p.m.
Abb. 48: Annualprogram-Cycle2
3.
4.
5.
6.
7.
The pulse duration must be less than the period.
No nesting of cycle programs is allowed.
2.
2.