Operation Manual

114
Starting the program
1. Starttheprogramandselectyourtimer(seechapter3).
Z
The main menu opens.
2. In the register, click on the button Annual Programs.
3. Select in the register the channel for which the yearly program should be
created,e.g.CH1=channel1.
Itispossibletospecifychannelsbydouble-clickingontheChannelstab.
A
Pulse programming
4. Select the switching command .
5. Clickwiththeleftmousebuttoninthelineforchannel1(CH1)ontheeld
03:00 p.m. to set the pulse switching command.
Z
Thewindow"Pulse/CycleSettings"opens.
6. Settheminutesandsecondsforthepulsedurationandconrmyourinputby
clicking on OK.
Z
The calendar opens.
10.2 Annual program – Pulse
Abb. 42: Annual program - Pulse
Abb. 43: Annual program - Pulse 2
Example
Channel1shouldbeswitchedONeverydayfromJuly1toOctober30at
03:00 p.m.
The ON switching duration is 15 minutes.
2.
3.
2.
3.
4.
5.
6.