Operation Manual

110
Starting the program
1. Starttheprogramandselectyourtimer(seechapter3).
Z
The main menu opens.
2. In the register, click on the button Annual Programs.
3. Select in the register the channel for which the yearly program should be
created,e.g.CH1=channel1.
Itispossibletospecifychannelsbydouble-clickingontheChannelstab.
A
ON / OFF programming
4. Select the switching command .
5. Clickwiththeleftmousebuttoninthelineforthechannel1(CH1)ontheeld
06:00a.m.tosettheONswitchingcommandandthenintheeld10:00p.m.
to set the OFF switching command.
Z
The calendar opens.
6. ClickwiththeleftmousebuttononApril1inthecalendarandholdthemouse
button down. Move the mouse pointer to September 30 and release the
button.
Z
The selected days are shown in bold letters and highlighted in yellow.
7. Select the weekdays on which you want the switching command to be
executed.
10.1 Annual program – ON/OFF
Abb. 37: Annualprogram-ON/OFF
Abb. 38: Annualprogram-ON/OFF2
6.
7.
8.
Example 1
A shop window lighting is to be switched automatically ON and OFF from April
1 to September 30:
Daily
06:00 a.m. ON 10:00 p.m. OFF
2.
3.
4.
5.
10. Annual program